Setting up Astro with Wiris Pro

Wiris Pro Payload Hardware Overview

Learn more about the Astro aircraft here:

Astro / Astro Max | Astro Publicfreefly.gitbook.io

The Wiris Pro Payload consists of a Freefly gimbal and an integrated Wiris Pro camera. It is developed for use with Astro and other vehicles that are compatible with the Freefly Smart Dovetail and the Pixhawk Payload Bus standard. More information about how to interface this payload with another aircraft is available here:

Integration for 3rd Party Applications

Updating Astro and Herelink

The Wiris Pro Payload is supported in Astro firmware version 1.3.2 or later

Make sure to update the Herelink controller to the latest version too!

Updating Firmware | Astro Publicfreefly.gitbook.io

Installing & Removing the Wiris Pro Payload from Astro:

Installing/Removing Payloads

Swapping out the Wiris Foam Insert

We offer an option foam insert for the Astro hard case. It replaces the insert for the Mapping Payload, so you can store Astro with the Wiris Pro payload installed

Wiris Pro Payload Foam Insert (Astro Case)Freefly Store

• Start by removing the Mapping Payload insert. There is a velcro strip on the bottom of the foam

• Insert the Wiris Pro payload bottom foam. Note the orientation

• Install the upper piece of the foam around the gimbal from the front of Astro