To check Flux firmware version or update software:
Power on Flux while connected to Astro
Access to Flux Update Webpage at 192.168.144.233 from:
Pilot Pro tablet
iPad connected to Pilot Pro
Computer connected to pilot Pro via Ethernet
Access to Flux Update Webpage at 10.42.0.1 from:
USB-C Ethernet adapter connected to Flux Flux USB does not support USB device mode, a USB Network adapter must be used.
The Flux software version is listed at the top of the page:
Provide Flux software file
Update will validate file and install update
Flux will reboot once install is complete
Refresh web browser for version to update
Format USB Storage on Flux via Flow App
Copy Flux software file to USB Storage root directory
Insert USB Storage into Flux
System will reboot if Software Update is a newer version
If Flux is not running correctly due to a failed or invalid update, System Recovery can be triggered by pressing Flux button when powering up. Recovery will execute the factory software instead of any installed update.
If an software update is present on the USB Storage, the factory software will install it and reboot. It is recommended to disconnect USB Storage when performing System Recovery to allow connection with the Flow App. Software update can be performed afterwards.
1.0.0
Initial release for Freefly Flux L1, O1, and H1
Last updated
