# Connect Mōvi Controller and FRX Pro to your Mōvi

1. On the receiver (gimbal) side, plug one end of the included COM cable into the FRX Pro UART port. Plug the other end of the cable into COM 1 on the top of the GCU (the screen on the gimbal).

<div align="center"><figure><img src="/files/kksY1Ixgxk8KJjtYdPA9" alt="" width="188"><figcaption><p>Plug the COM cable into the UART port on the FRX Pro receiver.</p></figcaption></figure></div>

<figure><img src="/files/CZZbyHwQSEyfKKLTKFPm" alt="" width="188"><figcaption><p>Plug the other end of the COM cable into the COM 1 port on top of the gimbal GCU.</p></figcaption></figure>

2. On the transmitter side, plug the included USB A-C cable into the USB-C port on the FRX Pro. Then, plug the included D-Tap cable into the CAN port.&#x20;

<figure><img src="/files/1sbMDAFGM5YryZoU2Uuv" alt="" width="188"><figcaption><p>Plug the included USB A-C  cable into the USB-C port on the FRX transmitter.<br>Plug the included D-Tap cable into the CAM port.</p></figcaption></figure>

3. On the controller, plug the USB A side of the cable into the bottom USB-A port. Then, plug the D-Tap cable into the D-Tap port on the battery or battery plate.

<figure><img src="/files/vH4YPbPOpQMOiKUAQsPu" alt="" width="188"><figcaption><p>Plug the COM cable into the bottom USB port.<br>Plug the D-Tap into the D-Tap port on either the battery or battery plate.</p></figcaption></figure>

4. On the controller menu, go to HOME> RADIO CONFIG> RADIO TYPE and change from INTERNAL to USB. Once the setting has been changed, 'Write' it to the MōVI Controller's memory by selecting the 'Write' field on the next line and pressing the Menu Set knob.

* *To use the old MC-RX receiver with the MōVI Controller, you must set the Radio Type back to 'Internal’.*

<figure><img src="/files/QGNspwtU9JtLigZcSLgb" alt="" width="375"><figcaption><p>Change the Radio Type from Internal to USB.<br>Write it to the controllers' memory by selecting the write field and pressing the menu set knob.</p></figcaption></figure>

5. You can read about the FRX Pro binding procedure [here](https://freefly.gitbook.io/freefly-public/products/frx-pro/how-to-use/how-to-bind).
6. You can read about the FRX Pro mounting procedure [here](https://freefly.gitbook.io/freefly-public/~/changes/MdahUBLAu9kVGVfE9SqB/products/frx-pro/how-to-use/how-to-mount).


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.freeflysystems.com/products/products/m-vi-pro-series/m-vi-controller/connect-movi-controller-and-frx-pro-to-your-movi.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.