> For the complete documentation index, see [llms.txt](https://docs.freeflysystems.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.freeflysystems.com/products/products/alta-x/untitled-5/fpv-camera-and-transmitter.md).

# FPV Camera and Transmitter

## FPV System installation

Note: If you are installing a different FPV Transmitter other than the Freefly FPV system, please see the appendix section for wiring guidance.

|    |                                                                                                   |                                                                                                                                                                                 |
| -- | ------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 1. | Connect the FPV camera cable to the FPV extension located inside the chassis at the base of boom. | ![](https://lh6.googleusercontent.com/HXDP7YGrxOaiacx3mV7AS1WEqhXG4-gApY1mheCgdcLZyqVlh8ViiG5SrKLLZes-2H8K-zILHD2_MAw6RKkzDk6kGy6WhqVoE0z0OllNgDGTd-Fcj3UNNx3ppYFIGfE_GgbCul3G) |
| 2. | Screw the FPV mount to the top of the chassis with the (x4) M3x14 screws and washers.             | ![](https://lh3.googleusercontent.com/257AQSzLXCbIxSr8O7vtpFVZUfJHj1-x4ZwJSQhbuEZRpZqTEy3342kU3Tbe9CBjVR2FJnfBcqq6XsZgq6tWPsiMuMnJtaXGQh0l1xo2uZYUyqPLiMl-sl66SZ3KD7U4GbI68I-5) |
| 3. | Screw the FPV camera bracket to the FPV mount with (x2) M2.5x5 screws and washers.                | ![](https://lh5.googleusercontent.com/sYYlQ1vHUgNE2eRY04AgmcdmlHt7gywPGWLxGsPuBxiYgyvSZVBTo2DJd8X4bgQEDebXiE850xG4M580TNDI8IgZc55lCs1TxVreu4-FVtG3VCfvcfvSUEsbXxTQllpkl2mAmywt) |
| 4. | Screw the FPV camera to the bracket using the included (x4) M2x4 screws and washers.              | ![](https://lh4.googleusercontent.com/3AgXMBXGe3QGGR3yNTD2KXhLZFk2kdUSWTunOp5QwY7PDvmN8hYjcl_3T4Q98duaCxpZwscoZfIIptH-wa5079l-TKcjfVcOIpu_txHk4FaWseHykjEtDdtHizyOY2YWHU9BuI08) |
| 5. | Plug the FPV cable into the back of the camera.                                                   |                                                                                                                                                                                 |

## VTX System Installation

|    |                                                                                                                                                                                                            |                                                                                                                                                                                                                                                                                                                  |
| -- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 1. | Connect the VTX cable to the VTX extension located inside the chassis at the base of boom #3                                                                                                               | ![](https://3429200414-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LaNHxABbg20hfA0zTDQ%2F-LoN3OOK-BIFo9qbXkSn%2F-LoNCygFQOMlhY2fCtzQ%2FUntitled%20presentation%20-%20Google%20Slides%20-%20Google%20Chrome%202019-09-09%2015.36.17.png?alt=media\&token=c12b6c74-476c-4f87-b101-1963257e7df3) |
| 2. | Screw the VTX and its mount to the interior of the closeout panel adjacent to the base of boom #3 using 2x M3x10 screws. Then plug in the VTX cable. This can be done without removing the closeout panel. | ![](https://3429200414-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LaNHxABbg20hfA0zTDQ%2F-LoN3OOK-BIFo9qbXkSn%2F-LoNCw1p7YQkQtUTnYzr%2FUntitled%20presentation%20-%20Google%20Slides%20-%20Google%20Chrome%202019-09-09%2015.39.45.png?alt=media\&token=58562b04-17e7-449b-95ed-7a973651410e) |
| 3. | Route the SMA mount and cable through the access port at the base of boom #3. Ensure you do not unplug the u.FL connector during this step.                                                                |                                                                                                                                                                                                                                                                                                                  |
| 4. | Screw the SMA mount to the accessory mounting pattern using 2x M3x5 screws                                                                                                                                 | ![](https://3429200414-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LaNHxABbg20hfA0zTDQ%2F-LoN3OOK-BIFo9qbXkSn%2F-LoNCtK-aqbJiCt_Hvlo%2FUntitled%20presentation%20-%20Google%20Slides%20-%20Google%20Chrome%202019-09-09%2015.48.19.png?alt=media\&token=ce2ce2cd-e78a-44b8-9ac3-0496c258a38b) |
| 5. | Attach the included TBS Triumph Antenna to the SMA jack and tighten.                                                                                                                                       |                                                                                                                                                                                                                                                                                                                  |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.freeflysystems.com/products/products/alta-x/untitled-5/fpv-camera-and-transmitter.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
