Pro Tips
App features:
The overlay bubble shows tether power, length and an HV toggle on top of AMC, so you don’t need split screen.
If BLE drops, the app keeps showing estimated power and length, calculated from aircraft telemetry.
Tether handling:
Adjust tension mid-flight: run it lower near the ground for agility and raise it while climbing or in wind at altitude.
Lay the tether out away from foot and vehicle traffic.
When manually retracting tether cable during pack up.
Release Take Up before the plug reaches the ground unit so the cable doesn’t retract too fast.
Guide the cable by hand while it retracts. This helps control the retraction speed and lets you inspect the cable for damage.
Power management:
Dim the lights while climbing, then bring them back up at altitude. This avoids hitting the power limit.
Know your baseline draw (about 1100W with lights off, about 2800W at 100%). A creeping number is an early sign of wind or a problem.
For long nights on a generator, size the fuel for the full flight plus a buffer.
Operations:
If the tablet has an issue, HV can still be controlled from the ground unit screen.
Keep sunglasses handy, since the 175,000-lumen panel is blinding at close range.
Wind at 80m can be much stronger than on the ground, so plan tension and position for that.
Limitations:
Don’t fly in the rain.
The power limit is 3000W, and the ground unit shuts down above it.
Tether length is 110m, with the alarm at 95m.
Estimated values are approximate. Treat them as a backup, not as primary data.
Last updated