Herelink Radio

Binding

• Prepare tweezers or paperclip.

Astro and Alta X Gen 2

• Power on Astro or Alta X Gen 2 with one battery
• Find the bind button on the IO Panel - next to the yellow XT connector.

  
• Press on the bind button 3 times. The boom LED starts to blink white confirming that it is in binding mode.

The boom LEDs blink during pairing only on drone firmware v2.3.7 or later.

Alta X Gen 1

• Using tweezers, press and hold the Herelink unit's "Pair/Reset" button until LED2 blinks (hold approximately 3 seconds)

Pilot Pro

• Using tweezers, press and hold the Pilot Pro Herelink unit's "Pair/Reset" button until LED2 blinks (hold approximately 3 seconds)

  
• Ensure the light goes solid and the Boom LEDs on the Drone go back to its original colors.
• Open the flight app on Pilot Pro (AMC for Astro) and verify the connection to the aircraft