# Doodle RJ45 Ethernet Port

The Doodle Labs Radio Backpack includes an RJ45 ethernet port on the bottom of the module. This interface is disabled by default as a security measure. To instructions below will go over enabling or d

## Enable/Disable Ethernet on the Doodle Labs Module

1. Open the Pilot Pro App and open the side menu

<figure><img src="/files/zHy1OMWCjtfLXpi71Of0" alt=""><figcaption><p>Opening side menu in the Pilot Pro App</p></figcaption></figure>

2. Navigate to 'Radio Settings'

<figure><img src="/files/JTazIFWvqXS0FdONo7jP" alt=""><figcaption><p>Radio Settings location in the Pilot Pro App</p></figcaption></figure>

3. Go to the 'Advanced' tab, and enable/disable RJ45 Access

<figure><img src="/files/U52YlVcib4CPcoWlozum" alt=""><figcaption><p>Enabling/Disabling RJ45 Access for the Doodle Module</p></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.freeflysystems.com/ecosystem/controller/pilot-pro/operating-handbook/radio-modules/doodle-labs-radio-module/doodle-rj45-ethernet-port.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.