# Electrical Interfaces

<figure><img src="/files/w4tSalVe1PUELFqp1ovP" alt=""><figcaption></figcaption></figure>

| Connector                             | Information / Pinout                                                                                                                                                                                                                                             |
| ------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| 1: USB C Charge Input                 | <p>USB C PD Supports up to 100W input<br>No Data</p>                                                                                                                                                                                                             |
| 2: Molex External Power Input and CAN | <p>5-26V up to 100W input<br>(12V-26V recommended for powering while in use or fast charging)<br><img src="/files/nd5OOIksu8clMMZcxIE9" alt=""><br>1 - GND</p><p>2 - Power In</p><p>3 - CAN High</p><p>4 - CAN Low<br><br>Mating Connector: Molex 0430250400</p> |
| 3 and 4: JST GH 6-pin                 | <p><img src="/files/QaNJmhAa0EwkSA7UwmsE" alt=""><br>1 - GND<br>2 - 5V (1A) Output<br>3 - UART TX (output from Pilot Pro)<br>4 - UART RX (input to Pilot Pro)<br>5 - GPIO<br>6 - GPIO<br><br>Mating Connector: JST GHR-06V-S</p>                                 |
| 5: Micro SD Slot                      | Recommended: SanDisk Ultra microSD or faster                                                                                                                                                                                                                     |
| 6 and 7: USB C 3.0 Data and Power Out | <p>USB type C Connector<br>5Gbps SuperSpeed<br>5V at 1.5A power output per port</p>                                                                                                                                                                              |


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.freeflysystems.com/ecosystem/controller/pilot-pro/interfaces/electrical-interfaces.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.